Skip to content
FREE, FAST Shipping on all U.S. orders!
FREE, FAST Shipping on all U.S. orders!
Resellers Customer Service Step By Step Installation Guides About us News
Shop By Printer
Search
CM2™ Nozzle - for FlowTech™ Hotend

CM2™ Nozzle - for FlowTech™ Hotend

$ 23.75 - $ 23.75
$ 23.75
$ 23.75 - $ 23.75
$ 23.75
SKU

Micro Swiss CM2™ Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.

Micro Swiss CM2™ Nozzle Features:

  • Copper Chromium Zirconium body

    • Plated with an Electroless Nickel Plating

  • M2 Hardened High Speed Steel insert
    • Plated with a Electroless Nickel Plating
    • Coated with nonstick nano WS2 coating.
    • Coefficient of friction: 0.035
    • Heat-treated hardness:  68 HRC

  • Orifice size available: .4mm, .6mm, .8mm, 1.0mm

  • Limited lifetime warranty against wear
    Warranty


Made in USA by Micro Swiss

Fits
      Choose a Nozzle Size

      Customer Reviews

      Based on 22 reviews
      86%
      (19)
      0%
      (0)
      9%
      (2)
      5%
      (1)
      0%
      (0)
      B
      Barry W Pybas
      Upgrade to Hardened Nozzles

      Just received the .4 and .6 hardened nozzles for the MicroSwiss hotend replacement for my K1 Max printer. I've installed the .4 instance with the new hotend and initial prints are very good using PLA. Will be trying higher temp filaments in the future, and expect the same quality results.

      R
      Robert Frazier
      Well made

      Very well made and works great.

      C
      Customer
      Nozzle

      Fast delivery does as advertised

      P
      Phil Bush
      After Two Weeks of Use

      After Two weeks of printing on my K1C since fitting the new Hot-End with various Filaments inc. ABS+CF & PP+CF I have had no disastrous prints, in fact ABS+CF parts have turned out great and with much better results than using the 'Unicorn' Nozzle. Standard Filaments PLA etc. have printed very good too.
      The main reason for my trying the Micro Swiss is; I print mainly with Carbon filled Filaments, the 'Unicorn' Nozzle was forever 'Blocking Up'..... I have not had a single blockage while using the Micro Swiss & I have been using the 0.4 Hardened Nozzle and I have not needed to use the 0.6 Hardened Nozzle that I purchased alongside the Hot-End.
      A Highly Recommended Upgrade to the 'standard' K1C & I would say, an absolute necessity for the K1 & the K1 Max's.

      A
      Anonymous
      Works perfectly

      I've been printing PA-CF with this nozzle and have had 0 issues

      123