Skip to content
FREE, FAST Shipping on all U.S. orders!
FREE, FAST Shipping on all U.S. orders!
Shop By Printer

FlowTech™ Hotend for Creality CR-10 SE

Original price $ 64.99 - Original price $ 64.99
Original price
$ 64.99
$ 64.99 - $ 64.99
Current price $ 64.99
SKU M3102

FlowTech™ Hotend for Creality CR-10 SE

The FlowTech™ Hotend is a new generation hotend line from Microswiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.

Keeping with our philosophy, the FlowTech hotend is designed to be an easy drop-in upgrade for each 3D printer model. This edition is designed for CR-10 SE. Stock z-height, build volume and firmware remains unchanged.

Made in USA by Microswiss

Features:

  • Leak-Proof Nozzle:
    Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.

  • Cold Nozzle Change:
    Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.

  • High-Flow Characteristics:
    Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.

  • All-Metal Design:
    Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.

  • 300°C Max Temperature:
    This hotend is rated at 300°C temperature with a properly tuned NTC thermistor for each specific printer. This particular edition is perfectly tuned for CR-10 SE so no firmware changes are needed.

Fits:
  • Creality CR-10 SE
What's in the box
  • 1x FlowTech™ Heater Core 
  • 1x Copper Thermal Adapter
  • 1x FlowTech™ Brass Plated 0.4mm Nozzle
  • 2x Titanium Mounting Screws
  • 1x Silicon Sock
Installation

PDF:
Installation Instructions - PDF

Video Guides:

Coming soon...

Spare Nozzles

FlowTech™ Brass Plated Nozzles

FlowTech™ CM2™ Nozzle

FlowTech™ DiamondBack Nozzles

FlowTech™ - CHT High Flow Nozzles

Customer Reviews

Based on 6 reviews
17%
(1)
17%
(1)
17%
(1)
17%
(1)
33%
(2)
D
D.B.
Great Product

I really like this hot end. Easy to install. Only issue that i had is withgetting the bowden tube the correct length so it would not pool. After i got that smooth sailing.

S
Serafín Rodríguez
DON´T BUY!!!

Compré el hotend por un atasco monumental en el hotend de casa.
Terrible error. Dos semanas probando todo lo inimaginable y esta mierda sigue saltando. Ni subir temperaturas, ni pasta termica...
ES UNA BASURA MUY CARA!!!

K
Ken Watkins
Clogs

I gave up on this hotend. It kept clogging.

M
Melanie

ya didn't work . terrible prints. could be more fault but i tried everything

J
Jonathan

Not very happy with this thing, my prints are coming out very strange, lots of wrinkles on it and I didn't have that before, almost as it over flowing the feed, also hardened nozzle is junk, leaves traces of unmelted material, I didn't have this problem with sock hot end and stock nozzle, now I'm stuck with something I don't like because it doesn't work, I switched back to stock parts and everything is good again, very very disappointing

Customer Reviews

Based on 6 reviews
17%
(1)
17%
(1)
17%
(1)
17%
(1)
33%
(2)
D
D.B.
Great Product

I really like this hot end. Easy to install. Only issue that i had is withgetting the bowden tube the correct length so it would not pool. After i got that smooth sailing.

S
Serafín Rodríguez
DON´T BUY!!!

Compré el hotend por un atasco monumental en el hotend de casa.
Terrible error. Dos semanas probando todo lo inimaginable y esta mierda sigue saltando. Ni subir temperaturas, ni pasta termica...
ES UNA BASURA MUY CARA!!!

K
Ken Watkins
Clogs

I gave up on this hotend. It kept clogging.

M
Melanie

ya didn't work . terrible prints. could be more fault but i tried everything

J
Jonathan

Not very happy with this thing, my prints are coming out very strange, lots of wrinkles on it and I didn't have that before, almost as it over flowing the feed, also hardened nozzle is junk, leaves traces of unmelted material, I didn't have this problem with sock hot end and stock nozzle, now I'm stuck with something I don't like because it doesn't work, I switched back to stock parts and everything is good again, very very disappointing