Skip to content
FREE, FAST Shipping on all U.S. orders!
FREE, FAST Shipping on all U.S. orders!
Shop By Printer

FlowTech™ Hotend for ELEGOO Neptune 4 Plus / 4 Max

Original price $ 64.99 - Original price $ 64.99
Original price
$ 64.99
$ 64.99 - $ 64.99
Current price $ 64.99
SKU M3108

FlowTech™ Hotend for 
ELEGOO Neptune 4 Plus / 4 Max

Installing this hotend on Elegoo Neptune 4 Plus and Neptune 4 Max printers is a very quick and easy process. The kit comes with a plug and play Heater Core, thermistor and a heatsink fully compatible with Neptune 4 Plus and 4 Max. 
Stock z-height, build volume and firmware remains unchanged.

Upgrading your Elegoo Neptune 4 Plus and 4 Max to a FlowTech ecosystem allows you to use a full range of FlowTech, leak-proof nozzles including Diamondback nozzles that have a solid diamond tip - NOT a diamond coating.

Made in USA by Microswiss

Features:
  • Leak-Proof Nozzle:
    Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.

  • Cold Nozzle Change:
    Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.

  • High-Flow Characteristics:
    Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.

  • All-Metal Design:
    Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.

  • 300°C Max Temperature:
    This hotend is rated at 300°C temperature with a properly tuned NTC thermistor for each specific printer. This particular edition is perfectly tuned for Elegoo Neptune 4 Plus and 4 Max so no firmware changes are needed.
Fits:
  • ELEGOO Neptune 4 Plus
  • ELEGOO Neptune 4 Max
What's in the box

Installation

PDF:
Installation Instructions - PDF

Video Guides:

Coming soon...

Spare Nozzles

FlowTech™ Brass Plated Nozzles

FlowTech™ CM2™ Nozzle

FlowTech™ DiamondBack Nozzles

FlowTech™ - CHT High Flow Nozzles

Customer Reviews

Based on 23 reviews
96%
(22)
0%
(0)
0%
(0)
0%
(0)
4%
(1)
R
Richard Silk
not working

Spent 2 weeks try to get a good print. took it out of the printer put it in a box on a shelf never to see the light of day again . I installed the Elegoo brand nozzle and went back to running fine.

M
MARC AUBIN
Excellent stuff

I have two elegoo neptune 4 max printers and I initially bought one flowtech hotend upgrade when my stock hotend converted itself into a giant blob of petg. After seeing the difference in print quality between my stock printer and the one with the flowtech hotend, I bought another. East to swap nozzles, great flow, and beautiful prints. This is the hotend you need, and it bolts right in. Stop thinking about it and just buy it already.

L
Luis Toledano
it works perfectly

I have been printing and the quality is noticeable, I have not had any more failures regarding the OEM nozzle, I would like to see more improvements for other elegoo 4 max components.

K
Kimura Satoshi
Neptune 4 that does not purchase this hot end will not be able to demonstrate its performance!

The stock hot end doesn't warm up the ABS enough! You should buy this hotend!

D
Dušan Petrović
3D printer parts

I am very satisfied.
The goods arrived in a few days, really everything was in order and without any problem. My recommendation, perfect collaboration.

Customer Reviews

Based on 23 reviews
96%
(22)
0%
(0)
0%
(0)
0%
(0)
4%
(1)
R
Richard Silk
not working

Spent 2 weeks try to get a good print. took it out of the printer put it in a box on a shelf never to see the light of day again . I installed the Elegoo brand nozzle and went back to running fine.

M
MARC AUBIN
Excellent stuff

I have two elegoo neptune 4 max printers and I initially bought one flowtech hotend upgrade when my stock hotend converted itself into a giant blob of petg. After seeing the difference in print quality between my stock printer and the one with the flowtech hotend, I bought another. East to swap nozzles, great flow, and beautiful prints. This is the hotend you need, and it bolts right in. Stop thinking about it and just buy it already.

L
Luis Toledano
it works perfectly

I have been printing and the quality is noticeable, I have not had any more failures regarding the OEM nozzle, I would like to see more improvements for other elegoo 4 max components.

K
Kimura Satoshi
Neptune 4 that does not purchase this hot end will not be able to demonstrate its performance!

The stock hot end doesn't warm up the ABS enough! You should buy this hotend!

D
Dušan Petrović
3D printer parts

I am very satisfied.
The goods arrived in a few days, really everything was in order and without any problem. My recommendation, perfect collaboration.