Micro Swiss Bowden Dual Gear Extruder

$ 47.50
SKU M2714

Micro Swiss Bowden Dual Gear Extruder

Micro Swiss Bowden Dual Gear Extruder features the same quality construction as our Direct Drive extruders. It is designed to be a bolt-on replacement to most of the Bowden extruder machines on the market.

Features:

  • Dual-drive train
  • Hardened tool steel, CNC precision cut gears
  • Adjustable filament grip
  • Easy filament loading
  • Outstanding extrusion control
  • E-steps value: 130

 

CNC Machined and Assembled in USA

Fits:
  • Bowden extruder machines
  • Ender 3, 5, 6, CR10, CR-10s Pro, CR-10S, CR6-SE, Tornado
  • Fits NEMA 17 size stepper motors

Customer Reviews

Based on 11 reviews
100%
(11)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
Tim
Very worthwhile upgrade.

Installation was easy. The E-Steps GCODE file got me started, but like others had to configure for slightly more E-stops per 100mm of filament fed.
The quality of the components looks great and the kit was complete with no need to look in my bits boxes looking for screws.
The filament path is more visible, easier to load, and easier to clean up than the stock extruder on the CR-6SE.

R
Rico
Missing parts

When I got my order it was missing the wire that is post come with it sent replacement put everything together and even did the E-step download still does not work right getting a lot of clicking noise from my extruder and and it's even after adjusting the knob and everything and checking my files the cura to make sure it was right Still did not work right

M
Mark Mullins
Very nice!

I purchased a CR-10 V3 and absolutely hated the stock direct drive extruder. It is annoyingly loud, jams and finally broke. I have other printers that can print TPU, so I decided to go with this Bowden setup. It was very easy to install, and the directions were good. I removed the Titan mechanism and screwed a PC4-M10 into the stock hot end and seated the Bowden tube all the way down. After that I adjusted the E-steps and it was good to go. Problem solved and it's a much more dependable setup.

J
Jason Schofield
Ender 5 Plus filament run out

Fitted this to me Ender 5 and have had to bypass the filament run out as it does not line up with the filament path of the dual gear extruder. I n ed to look at making an adapter.

W
William J.
Astounding difference for this extruder compared to OEM. 3 perfect e-step calibrations after install

Following the instructions and printing the provided mount, it was so EASY and so ACCURATE! I got 3 consecutive perfect e-step calibrations after the setup. I am so glad I spent the extra $ for this high quality, precision built part.
A bonus bit of advice, consider making this before swapping out. https://www.prusaprinters.org/prints/65025-butterfly-nut-m6

I stretched the Z dimension to 12mm in the slicer and it perfectly fit the compression nut:
The center hole needed enlargement <8mm if adding to the nut after the fact. No enlargement is needed if you add the wingnut to the compression nut prior to initial assembly of the compression ring on the bowden tube. I printed in PETG, 50% infill.

Customer Reviews

Based on 11 reviews
100%
(11)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
Tim
Very worthwhile upgrade.

Installation was easy. The E-Steps GCODE file got me started, but like others had to configure for slightly more E-stops per 100mm of filament fed.
The quality of the components looks great and the kit was complete with no need to look in my bits boxes looking for screws.
The filament path is more visible, easier to load, and easier to clean up than the stock extruder on the CR-6SE.

R
Rico
Missing parts

When I got my order it was missing the wire that is post come with it sent replacement put everything together and even did the E-step download still does not work right getting a lot of clicking noise from my extruder and and it's even after adjusting the knob and everything and checking my files the cura to make sure it was right Still did not work right

M
Mark Mullins
Very nice!

I purchased a CR-10 V3 and absolutely hated the stock direct drive extruder. It is annoyingly loud, jams and finally broke. I have other printers that can print TPU, so I decided to go with this Bowden setup. It was very easy to install, and the directions were good. I removed the Titan mechanism and screwed a PC4-M10 into the stock hot end and seated the Bowden tube all the way down. After that I adjusted the E-steps and it was good to go. Problem solved and it's a much more dependable setup.

J
Jason Schofield
Ender 5 Plus filament run out

Fitted this to me Ender 5 and have had to bypass the filament run out as it does not line up with the filament path of the dual gear extruder. I n ed to look at making an adapter.

W
William J.
Astounding difference for this extruder compared to OEM. 3 perfect e-step calibrations after install

Following the instructions and printing the provided mount, it was so EASY and so ACCURATE! I got 3 consecutive perfect e-step calibrations after the setup. I am so glad I spent the extra $ for this high quality, precision built part.
A bonus bit of advice, consider making this before swapping out. https://www.prusaprinters.org/prints/65025-butterfly-nut-m6

I stretched the Z dimension to 12mm in the slicer and it perfectly fit the compression nut:
The center hole needed enlargement <8mm if adding to the nut after the fact. No enlargement is needed if you add the wingnut to the compression nut prior to initial assembly of the compression ring on the bowden tube. I printed in PETG, 50% infill.

Net Orders Checkout

Item Price Qty Total
Subtotal $ 0.00
Shipping
Total

Shipping Address

Shipping Methods