Spares & Upgrades

Capricorn XS bowden tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament w...

A pack of 3 high temperature non-stick silicone socks for MK7/MK8/MK9 hotends. Socks are made of a heat-resistant, non-stick silicone material, it ...

This is Micro Swiss aluminum heating block upgrade with slotted clamping system for CR-10 / Ender family printers and any MK7, MK8, MK...

This replacement hotend assembly is suitable for Micro Swiss original and NG extruders and hotends. CNC Machined and Assembled in USA Fits M2583 M...

This is a replacement heater block compatible with Micro Swiss All Metal Hotend Kit for CR-6 SE / CR-6 SE MAX / CR-10 Smart Printers. ...

A pack of 3 high temperature non-stick silicone socks for CR-6 SE Printers.Socks are made of a heat-resistant, non-stick silicone material, it will...

This Micro Swiss plated heater block upgrade is built from a high-temperature Copper Chromium Zirconium that allows you to reach tempe...

This Micro Swiss plated heater block upgrade is built from a high-temperature Copper Chromium Zirconium that allows you to reach tempe...

Spare 4mm brass compression sleeves for Micro Swiss All Metal Hotend for CR-6 SE printers.   Fits All Metal Hotend Kit for Creality CR-6 SE / CR-...

This is replacement Bowden Collets for Micro Swiss CR10 hotend kit (Set of 3) Fits: Micro Swiss hotend for CR-10 / Ender Kit Micro Swiss hotend fo...

This is a replacement Grade 5 Titanium heat break for Micro Swiss All Metal Hotend Kit for CR10 Printers.  Fits: Micro Swiss hotend for CR-10 / En...

Replacement Cooling Block for Micro Swiss All Metal hotend kit for CR-10 / Ender Printers. Made in USA by Micro Swiss Fits: Micro Swiss hotend for...

Replacement Cooling Block for Micro Swiss All Metal hotend kit for CR-10s PRO / CR-10 Max / Ender 3 V2 Neo Printers. Made in USA by Micro Swiss Fit...

Replacement Cooling Block for Micro Swiss All Metal hotend kit for CR-6 SE Printer. Made in USA by Micro Swiss Fits: CR-6 SE with Micro Swiss All...

Set of 3 CONE HEX SOCKET SET SCREW DIN 914 M3 Thread 3 mm Long 1.5 mm Hex Socket 2 mm Socket Depth

Main Body for Micro Swiss Direct Drive Extruder configured for ExoSlide System CNC Machined and Assembled in USA Fits Printers with ExoSlide Syste...

Main Body for Micro Swiss Direct Drive Extruder configured for Linear Rail System CNC Machined and Assembled in USA Fits Printers with MGN12 Linea...

This is a spare Extension Cable for Micro Swiss Direct Drive kit for CR-10 / Ender printers.  67cm long Only works with original Micro Swiss Dire...

Pack of five Capricorn PTFE liners for Micro Swiss Direct Drive Kits and All Metal Hotend for CR10 and Ender printers. Specifications: 50mm long  ...

This is a spare hardware kit for Micro Swiss Direct Drive kit for CR-10 / Ender printers.  This kit contains: 1x Beveled PTFE liner 3x M3 x .5 x 6...

This is a spare motor gear for Micro Swiss Direct Drive kit for CR-10 / Ender printers.  Precision CNC machined teeth  Hardened tool steel

This is a spare tension lever for Micro Swiss Direct Drive kit for CR-10 / Ender printers.  Comes with gear and shoulder bolt

This is a spare tension hardware kit for Micro Swiss Direct Drive kit for CR-10 / Ender printers.  Tension Pin Spring Tension Knob

This is a Micro Swiss replacement thermal tube for MK10 / MK11 hotends. The lower thermal break is made from stainless steel, and the colder upper ...

This is a Micro Swiss replacement thermal tube for All Metal Hotend Kit for Flashforge Finder, Inventor 2, Guider 2. The lower thermal break is mad...

This heat break is a direct replacement for use in E3D v6 1.75mm hot ends. This tube made from stainless steel and plated with TwinClad XT coating....

This heat break is a direct replacement for use in E3D v6 3mm hot ends. This tube made from stainless steel and plated with TwinClad XT coating. Tw...

This is a performance MK8 All Metal Thermal Tube Upgrade. It is made from stainless steel and plated with TwinClad XT coating. TwinClad XT is a ver...

This is redesigned cooling block for Wanhao i3 with the following improvements: Slotted Clamping system No set screw to ding and damage thermal tu...

This is a Micro Swiss replacement thermal tube for All Metal Hotend Kit for Zortrax M200, M300. The lower thermal break is made from stainless stee...

This is an adaptation plate to mount the Micro Swiss NG™ and NG™ REVO Direct Drive Extruder on Creality CR-10 / Ender 3 Printers.  CNC Machined and...

This is an adaptation plate to mount the Micro Swiss NG™ and NG™ REVO Direct Drive Extruder on Creality CR-10 / Ender 3 Printers with a linear rail...

This is an Adaptation Plate to mount the Micro Swiss NG™ and NG™ REVO Direct Drive Extruder on Creality Ender 5 / 5 Pro / 5 Plus  CNC Machined and ...

This is an adaptation plate to mount the Micro Swiss NG™ and NG™ REVO Direct Drive Extruder on Creality Ender 5 / 5 Pro / 5 Plus with a linear rail...

This is a spare extension cable for Micro Swiss NG™ Direct Drive Extruder. Replacement cable for following NG™ Direct Drive Extruder: M3201 M3202 ...

This is a spare extension cable for Micro Swiss NG™ Direct Drive Extruder. Replacement cable for following NG™ Direct Drive Extruder: M3206

This is an adaptation plate to mount the Micro Swiss NG™ and NG™ REVO Direct Drive Extruder on Creality Ender 6.  CNC Machined and Assembled in USA...

This is an adaptation plate to mount the Micro Swiss NG™ and NG™ REVO Direct Drive Extruder on Creality CR-10 V2 / V3.  CNC Machined and Assembled ...

This is an adaptation plate to mount the Micro Swiss NG™ and NG™ REVO Direct Drive Extruder on ExoSlide System.  CNC Machined and Assembled in USA ...