MK8 Plated A2 Tool Steel Wear Resistant Nozzle (CR10 / Ender / Tornado / MakerBot)

$ 19.75
SKU M2585-04
Nozzle Size

This is MK8 style nozzle, it is made from a A2 Tool Steel, heat treated to 57-62 RC and plated with TwinClad XT coating.  If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.

Orifice size available: .4mm, .6mm, .8mm, 1.0mm

Made in USA by Micro Swiss

  • Alfawise U20
  • Alfawise U30
  • Anet A8
  • BQ Prusa I3 Hephestos
  • BQ Witbox
  • CraftBot 2
  • CraftBot PLUS
  • CP-01
  • CR-10
  • CR-10 V2
  • CR-10 MINI
  • CR-10-S4
  • CR-10-S5
  • CR-10S
  • Ender 2
  • Ender 3
  • Ender 3 V2
  • Ender 3 Pro
  • Ender 3 Max
  • Ender 5
  • Ender 5 Plus
  • Ender 5 Pro
  • Ender 6
  • Flsun QQ-S
  • Geeetech A10, A20, A30
  • MakerBot Replicator 1
  • MakerBot Replicator 2
  • MakerBot Replicator 2x
  • MakerBot Replicator 5th Gen
  • MakerBot Replicator Mini
  • MakerBot Replicator z18​
  • Micro Swiss All Metal Hotend for CR-10 (M2583-04)
  • Micro Swiss All Metal Hotend for CR-10s Pro (M2591-04)
  • Snapmaker 3-in-1 3D Printer
  • Tevo Tornado
  • TronXY X5S
  • Threads: M6x1.0
  • Thread length: 5mm
  • Overall length: 13mm

Customer Reviews

Based on 6 reviews
Christopher Sullivan

At first pricing i thought it was insane to spend this much on 1 nozzle. I decided there must be something special about the nozzle and bought it. Let me tell you that nozzle went 5 months before i got one clog. As far as im concerned that justifys the price hands down! No more frustration with clogging nozzles and the problems that come with a clogged nozzle. Ill stand by this brand for sure. Im always recommending the microswiss brand in all my groups and ill recommend it here. Top notch made in America products.

Jeffrey Cole
By far the Best nozzle i have ever used

While looking for a new nozzle I knew I wanted a hardened steel nozzle due to the variety of filaments I print and that is when I heard about Micro Swiss. I saw the price and was a bit skeptical seeing 20$ for 1 nozzle but I have no problem paying for quality items. so I placed the order and waited. after receiving and installing the new nozzle I adjusted and leveled the bed and went to printing. all I can say is WOW, the results I got from this nozzle were unbelievable. by far the best quality prints I've ever got with Carbon Fiber ABS and especially glow in the dark filaments, this nozzle has also performed exceptionally well with all forms of PLA from Silk PLA to PLA + etc... the only problems I've had sense installing this nozzle have all been my fault and user related nothing due to the nozzle. I doubt I will ever use another brand again and will continue to purchase Micro Swiss products. I'm not being paid to write this review and micro swiss has not asked me to either and normally I'm not the person to write reviews, I just truly think with the results I've had over the past 3 months this is the best nozzle I've ever had. I plan on upgrading the direct drive and all metal hot end I currently use to a micro swiss set up if and when they get them back in stock as I've heard my good things about them. I highly recommend this product and this brand you 100% get what you pay for and more, Micro Swiss has definitely got a customer for life out of me.

Took a lot of abuse before it failed.

Three months of straight printing. Countless spools of PLA, TPA, TPU, ABS, and Nylon and after three months of continual printing I finally clogged this so badly I can't recover it. I will be trying some rather more difficult and dangerous recovery options (heated acids, Muffle furnaces at 400C for several hours, etc) since I have an actual chemistry lab to perform these tests, but as it stands right now, the clog is amazingly strong.

I don't know if the coating came off, or if something actually is so tightly packed into it that its permanently clogged, but it is done for. However, since I had other nozzles already purchased (A2 coated as well) I popped a brand new nozzle into my Creality Ender 5 MicroSwiss Hotend, and was printing in no time at all. 5 out of 5 stars because it took a hell of a beating (maybe one day I will get another printer to make life easier on this one....

Clint StLaurent
Great nozzles - Still waiting on a 1.0

Awesome product... Still waiting on a 1.0 and 1.2 for doing large items on my CR10s-5 with Microswiss extruder.

Great nozzle, will use these from now on

Great nozzle. Been using these for 6 months now with no issue. the coating helps keep most material from sticking to it and easy to clean even when cold. I've run a good bit of glow in the dark filament through mine with no signs of any wear on it.

Customer Reviews

Based on 6 reviews Write a review

Net Orders Checkout

Item Price Qty Total
Subtotal $ 0.00

Shipping Address

Shipping Methods