Skip to content
FREE, FAST Shipping on all U.S. orders!
FREE, FAST Shipping on all U.S. orders!
Shop By Printer

Micro Swiss NG™ Direct Drive Extruder for Creality Ender 5 / 5 Pro / 5 Plus (Linear Rail Edition)

Original price $ 119.95 - Original price $ 119.95
Original price
$ 119.95
$ 119.95 - $ 119.95
Current price $ 119.95
SKU M3204


Micro Swiss NG™ Direct Drive Extruder

This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone.

With the Bevel Gear design, we are able to achieve the industry shortest filament path (less than 41mm). The unique motor placement allows for highly compact, low overhang design.  This further increases system rigidity. 

Features:

  • Lightweight
  • 3:1 Gear ratio
  • Adaptable to wide range of 3D Printers
  • Hardened steel, precision cut Dual Gear drive
  • Industry shortest, highly constrained, TwinClad XT™ plated filament path
  • Bevel Gear system allows a low overhang extruder mount
  • Integrated with a Micro Swiss All Metal Hotend

Made in USA by Micro Swiss

Fits
  • Following printer with MGN12 Linear Rail with MGN12H Carriage Block:
    • Ender 5
    • Ender 5 Pro
    • Ender 5 Plus
What's in the box
  • 1x Master Extruder Assembly
  • 1x Adaptation plate
  • 1x Stepper motor
  • 1x All Metal Hotend Assembly
  • 1x Fan Shroud
  • 1x Custom Extension Cable
  • 1x Printed Brackets

    Hardware:

  • 4x M3 x .5 x 6mm Flat Head Cap Screws
  • 4x M2.2 x 8mm Thread Forming Screw for Plastic
  • 4x M3 x 12mm Thread Forming Screw for Plastic
  • 1x 7mm spanner wrench.
  • 1x 1.5mm Allen wrench
  • 5x Zip Ties

    Installation

    Installation Instructions - PDF

    Downloads
    Spare Nozzles

    Brass Plated MK8 Nozzles

    A2 Hardened tool steel MK8 nozzles

    M2 Hardened High Speed Steel Nozzle MK8 nozzles


    Customer Reviews

    Based on 10 reviews
    70%
    (7)
    20%
    (2)
    0%
    (0)
    10%
    (1)
    0%
    (0)
    N
    Nicolas Landriault
    Steper motor stop working after 1 month..

    I bought product 3 time from micro swiss as I loved my other extruder I have. It was working like a charm, but this one stoped working.. the reason was that the stepper motor started to skip steps and now stop working. I tryed a other stepper motor to see if it was my mainboard but after switching the motor it was turning normaly... I dont know if I can buy the micro swiss stepper motor as it is made with a special gear built in without screw...

    J
    Johan Teekens
    Easy to install, looks solid, is awesome.

    Easy to install, looks solid, quality is awesome.

    The included bl touch mount melted and dislocated the bl touch after 2 hours of printing. I think because the temp in my enclosure got too high. Having a metal bl/cr touch mount would make it more robust.

    R
    Robby Vincent Diamse
    Metal part is superb… it is just that the fan shroud that fails…

    Almost perfect for my needs… just the shroud and the bl touch mount failed causing my adjustment to loose and my fan shroud to fall…

    J
    Joshua Raben
    Great Update

    I have been running an original MS DD and hot end on my modded/linear rail Ender 5 Pro for the past few years and loved the reliability and dependability at the slight expense of print quality. That is now over. This new NG version that is designed for mgn12 rails fixes EVERYTHING. The setup was simple. I see the e steps in my modded firmware and I had to reverse the stepper direction as well... Simple. The bl touch also mounted flawlessly. The print quality is also improved..
    And I turned up my print speed with no negative impact. This product is a WINNER!!

    J
    J.R.
    Great improvement

    I have been running a modded OG Microswiss Direct Drive on my Ender 5 Pro with linear rails. The original was HEAVY and would work itself loose with the printed conversion parts that I had to make to get to that point. It still printed well, but there had to be an improvement. THIS kit is that improvement. It is substantially more compact and the connection to the linear rail is GREAT. Lower profile (less wiggle)....lower weight (less momentum).....more compact (no interference with the front rail)....added a 5015 parts cooling fan (better cooling as the channels are much shorter). This is a win, win, win, win over my prior solution to use a Microswiss Direct Drive on my Ender 5 Pro with linear rails. The solution that I had worked well.....this newer NG unit is just that much better. Also I run the TH3D EzBoardv2 and that firmware lets me manually change/save the eSteps....so no need to even run the listed code from the instructions. I am very happy.