Skip to content
FREE, FAST Shipping on all U.S. orders!
FREE, FAST Shipping on all U.S. orders!
Resellers Customer Service Step By Step Installation Guides About us News Affiliate Program
Shop By Printer
Search
FlowTech™ Hotend for ELEGOO Neptune 4 / 4 Pro

FlowTech™ Hotend for ELEGOO Neptune 4 / 4 Pro

$ 64.99 - $ 64.99
$ 64.99
$ 64.99 - $ 64.99
$ 64.99
SKU M3107

FlowTech™ Hotend for ELEGOO Neptune 4 / 4 Pro

The FlowTech hotend is now available for Elegoo printers, starting with Neptune 4 and 4 Pro.

Installing this hotend on Elegoo Neptune 4 and 4 Pro printers is a very quick and easy process. The kit comes with a plug and play Heater Core, thermistor and a heatsink fully compatible with Neptune 4 and 4 Pro. 
Stock z-height, build volume and firmware remains unchanged.

Upgrading your Elegoo Neptune 4 and 4 Pro to a FlowTech ecosystem allows you to use a full range of FlowTech, leak-proof nozzles including Diamondback nozzles that have a solid diamond tip - NOT a diamond coating.

Made in USA by Microswiss

Features:

  • Leak-Proof Nozzle:
    Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.

  • Cold Nozzle Change:
    Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.

  • High-Flow Characteristics:
    Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.

  • All-Metal Design:
    Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.

  • 300°C Max Temperature:
    This hotend is rated at 300°C temperature with a properly tuned NTC thermistor for each specific printer. This particular edition is perfectly tuned for Elegoo Neptune 4 and 4 Pro so no firmware changes are needed.
Fits:
  • ELEGOO Neptune 4
  • ELEGOO Neptune 4 Pro
What's in the box
Documentation
Spare Nozzles

FlowTech™ Brass Plated Nozzles

FlowTech™ CM2™ Nozzle

FlowTech™ DiamondBack Nozzles

FlowTech™ - CHT High Flow Nozzles

Customer Reviews

Based on 9 reviews
78%
(7)
0%
(0)
0%
(0)
0%
(0)
22%
(2)
G
Glenn
Highly recommend

I can highly recommend Micro-Swiss. My goods arrived in the UAE within a few days of purchase via UPS. Their replies to my emails for advice was prompt. Their quality of products and service is really excellent.

K
Kaleb M.
Better than Stock

I bought the flow tech hot end for my Neptune 4 after the original fell victim to the blob of death. Luckily I only needed a new hot end instead of a complete print head. So far I’ve got about 20ish hours printing with this new hot end. Knocked out this Darry Vader piggy bank with no issue. The quality of my prints has been better and everything was a plug and play swap. Super easy upgrade and definitely worth the money.

User picture User picture
J
John L
So far, so good!(except for 1 little thing...)

I purchased the Microswiss Flowtech Hotend via Amazon and I couldn't have asked for an easier, but very impactful upgrade to my N4Pro! Installation was super easy thanks to the easy to follow and detailed instructions provided by Microswiss! (Except the 2 titanium mounting screws that were supposed to be in the box were nowhere to be found ??). I just used the screws that were in the stock hotend, and it went right in with no problem. I'm really excited to see what this can do as far as speed and layer adhesion! I'm waiting for the CHT nozzle I ordered as well, and then its game on! Thank you Microswiss for making this upgrade super easy, and at a not so bad price either!

M
Marshall Bartlett
Great upgrade to any Elegoo Neptune 4 series printer

I purchased both this head (for the Neptune 4 Pro) and one for our Neptune 4 Plus printer, both with 0.6mm M2 hardened nozzles. Both have been fantastic upgrades. We are able to get better print speeds due to the higher volumetric flow rate and worry a lot less about leaks. The cold swap option for the nozzles is a fantastic add and makes maintaining these A LOT simpler than the stock heads. Overall, this would be my #1 hardware upgrade recommendation for any Elegoo Neptune 4 series printer.

F
Felix Bloch
The most important upgrade to a Neptune 4 Series printer

I decided to go from a Stock N4Pro and upgrade it as much as possible. The hotend itself is probably the most impactful upgrade of the bunch. The filament flows more smoothly than I could have ever imagined, the layers are great and so is the speed.

12