Skip to content
FREE, FAST Shipping on all U.S. orders!
FREE, FAST Shipping on all U.S. orders!
Resellers Customer Service Step By Step Installation Guides About us News
Shop By Printer
Search
FlowTech™ Hotend for Bambu Lab X1 and P1 Printers

FlowTech™ Hotend for Bambu Lab X1 and P1 Printers

SKU
$ 74.95 - $ 164.95
$ 74.95
$ 74.95 - $ 164.95
$ 74.95
Choose a Printer Model
Choose a Nozzle

FlowTech™ Hotend for Bambu Lab Printers

Microswiss FlowTech Hotend is designed with advanced features for optimized performance. Paired with Bondtech CHT High Flow Nozzles, this hotend delivers up to 50 mm³/sec for ultra-fast printing without compromising quality. Installation is simple and plug-and-play, allowing you to integrate it seamlessly into your Bambu Lab Printers.

 

Made in USA by Microswiss

Fits:
  • Bambu Lab X1C
  • Bambu Lab P1S
  • Bambu Lab P1P
What's in the box
  • 1x FlowTech™ Heater Core for Bambu Lab
  • 1x Heatsink for Bambu Lab
  • 1x FlowTech 0.4mm Nozzle (CM2™, CHT, CM2™ CHT, DiamondBack)
  • 2x Titanium hotend mounting screws
  • 1x Silicon Sock
  • 2x Fan mounting shoulder screws
  • 1x Printed Nozzle changing tool
Documentation
Spare Nozzles

FlowTech™ - Brass Plated Nozzles

FlowTech™ - CM2™ Nozzle

FlowTech™ - CHT High Flow Nozzles

FlowTech™ - CHT High Flow CM2™ Nozzle

FlowTech™ - DiamondBack Nozzles

Sealed Heater Core:

Sealed Heater Core:

Unlike the original heater core, the FlowTech features a sealed heater core, providing the following benefits:

  • Enhanced Heat Retention: The sealed design efficiently traps heat within the core, ensuring stable and consistent printing temperatures.
  • Increased Durability: By protecting the heating element and thermistor, the sealed heater core reduces the risk of damage, extending the lifespan of the hotend.
CHT High Flow Performance:

CHT High Flow Performance:

An official collaboration between Microswiss and Bondtech brings the CHT High Flow nozzle to the FlowTech ecosystem. This nozzle incorporates proprietary CHT technology, specifically engineered to boost the flow rate and improve layer adhesion.

  • High Flow CHT
    The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec 
  • Better layer adhesion
    More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers

*If the CHT Nozzle option is selected

Leak-Proof Nozzle:

Leak-Proof Nozzle:

The FlowTech Hotend integrates the nozzle and titanium thermal break into a single, permanently sealed assembly, ensuring a leak-proof design.

Cold Nozzle Change:

Cold Nozzle Change:

Changing the nozzle on a Bambu Lab printer usually requires removing the entire hotend. However, with the FlowTech hotend upgrade, the process becomes remarkably quick and easy.

The FlowTech nozzle, integrated with a heat break, allows you to change the nozzle without preheating the hotend. With a FlowTech Hotend, nozzle changes are effortless, requiring no hot tightening and can be done with just two fingers and 3D printed nozzle changing knob.

Expanding Compatibility:

Expanding Compatibility:

Fully compatible with the growing FlowTech ecosystem, offering a wide range of nozzle options:

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Cody Martin

High quality, very well machined and tolerances are precisely produced. Installation was a breeze and operation has been smooth as I’ve started running tests. Nozzle quality is out of this world! Currently using the (CHT 0.2mm Brass Plated Nozzle) and close inspection using a loupe the bore is clean and machine work also flawless compared to competitors. The time put into these and for the price is something no one can beat! These are truely needed for both the X1 Series and P1 Series Bambu Lab printers.

Note that you’ll need to run tests of filaments you plan to run production on prior. I’ve noticed due to their new design of encasing the ceramic heater, temps are 5-10c higher than normal. This is the best 0.2mm setup you can possibly buy! Beats out E3D’s revo system in price and performance in my opinion. Made in the USA also so shipping is FAST!

S
Scott Andrews

Awesome Hotend. I bought this while waiting for another brand I ordered. The Flowtech was easy to setup and install with no printer modifications except changing software bed temp to 50c.
So far the only other changes I have made would be lowering fan speeds in software and nothing else.
I have used the hardened hotend to print everyday filaments and I plan to use it with Pla+, PetgCF, PetCf, and more but I expect it to work flawlessly. Further more I am planning to buy the diamond tipped nozzle in future.

J
JC
Just Makes the Printer even better!

Bought one for my X1C. Works perfect. So much easier changing nozzles now. Just installed one in my P1S and it's working great. Highly recombed this upgrade.

C
Cody Martin

High quality, very well machined and tolerances are precisely produced. Installation was a breeze and operation has been smooth as I’ve started running tests. Nozzle quality is out of this world! Currently using the (CHT CM2 HF 0.4mm Hardened Steel) and close inspection using a loupe the bore is clean and machine work also flawless compared to competitors. The time put into these and for the price is something no one can beat! Honestly thinking about removing the revo panda setup from another X1C and purchasing another one of these to add to the shop inventory, it’s that’s great.

Note that you’ll need to run tests of filaments you plan to run production on prior. I’ve noticed due to their new design of encasing the ceramic heater, temps are 5-10c higher than normal which is why they also state ensuring the chamber temperatures don’t exceed a certain threshold to prevent heat creep. If you’re not using these printers in a climate controlled environment, ambient temps are critical.